top of page

Innovations

our Presses

Dieffenbacher 2500T Press

  • Hydraulic press with maximum clamping force of 2500T

  • Parallelism control and a table size of 125” x 72”

  • Maximum closing speed is 800mm/sec

  • Capable for SMC, LFT, GMT, and future High Pressure 

       RTM materials and processes

  • Additional features are, Vacuum,   Heavy part lift assist

  • Hot air oven for pre-heating of GMT materials

  • Mould heating with Oil up to 300°F, Steam Heat up to 350°F,

       High Pressure Water to 350°F and cooling with water up to 180°F

 

 

Williams & White 2000t Press

  • Hydraulic press with maximum clamping force of 2000T

  • Table size of 124” x 96”

  • Maximum closing speed is 400mm/sec

  • Capable for SMC materials and processes

  • Additional features are, Vacuum

  • Mould heating with Oil up to 300°F, Steam Heat up to 350°F

       High Pressure Water to 350°F and cooling with water up to 180°F 

 

 

 

 

 

 

 

 

 

 

 

 

Dake 600t Press

  • Hydraulic press with maximum clamping force of 600T

  • Table size of 68” x 48”

  • Maximum closing speed is 400mm/sec

  • Capable for SMC materials and processes

  • Additional features are, Vacuum

  • Mould heating with Oil up to 300°F, Steam Heat up to 350°F High

       Pressure Water to 350°F and cooling with water up to 180°F

 

Laval 300t Press

  • Hydraulic press with maximum clamping force of 300T

  • Table size of 106” x 42”

  • Maximum closing speed is 400mm/sec

  • Capable for SMC materials and processes

  • Additional features are, Vacuum

  • Mould heating with Oil up to 300°F, Steam Heat up to 350°F High

       Pressure Water to 350°F and cooling with water up to 180°F

1000013702 (1).jpg
1000013703 (1).jpg
Hepburn.jpg
WILLIAMS and White.jpg
Erie (1).jpg

Hepbur 2000t Press

  • Hydraulic press with maximum clamping force of 2000T

  • Table size of 131” x 96”

  • Maximum closing speed is 600mm/sec

  • Capable for SMC, LFT, GMT materials and processes

  • Additional features are, Vacuum,  Heavy part lift assist

  • Hot air oven for pre-heating of GMT materials

  • Mould heating with Oil up to 300°F, Steam Heat up to 350°F

       High Pressure Water to 350°F and cooling with water up to 180°F

Erie 1000t Press

  • Hydraulic press with maximum clamping force of 1000T

  • Table size of 128” x 72”

  • Maximum closing speed is 400mm/sec

  • Capable for SMC materials and processes

  • Additional features are, Vacuum

  • Mould heating with Oil up to 300°F, Steam Heat up to 350°F

       High Pressure Water to 350°F and cooling with water up to 180°F

bottom of page